Samsung Galaxy S3 Mini Gt I8190 Stock Rom



[Clone] Flash Stock Rom on Samsung Galaxy S3 Mini GT-i8190

Samsung Galaxy S3 Mini Gt-i8190 Stock Rom

Samsung I8190 Galaxy S III mini Android smartphone. Announced Oct 2012. Features 4.0″ display, NovaThor U8420 chipset, 5 MP primary camera, 1500 mAh battery, 16 GB storage, 1000 MB RAM. Samsung Galaxy S3 Firmware download for any models. The quick review of the brand-new OTA update also flashable via Odin for the Samsung S3 firmware. This provides all Samsung Stock Firmware (Samsung Custom ROMs) for free to Download. We do some little research about Samsung Galaxy S3 Firmware, We can identify Samsung s3 update also find some. Make sure your device is Galaxy S3 mini GT-I8190, do NOT try to install this ROM on any other device. Install a custom recovery (TWRP) on your Galaxy s3 mini. Transfer/save the two zip files you downloaded above to your Galaxy S3 mini. Boot into Recovery mode: Turn off your Galaxy S3 mini and wait until it’s completely switched off.

Galaxy

We use SP Flash tool but we also give you all possible and available Flashing methods and all available Stock firmwares to Flash Stock Rom on Samsung Galaxy S3 Mini GT-i8190 Clone. Don’t worry If you really want to Flash a Rom to Unbrick, Rollback, Repair, unroot, full system restore then you are in right website. so Flash it. as wel, below the guide, we discuss about errors of flashing Custom / Stock Rom and we offer you possible solutions for those errors.

you should know these things

You can do this if you want Go back to Official Stock Rom or reinstall Stock firmware.
phone’s pc software does not want to install but phone driver must works on PC without error.
This Stock Rom has to be installed on this model only.
Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ SP Flash tool works on MTK Device only.. you had better check it first..
If you want to upgrade your Samsung Galaxy S3 Mini GT-i8190 Clone. then you have to find upgraded Rom – marshmallow,Lollipop, kitkat .we provide only Official Rom

Install Stock Rom on Samsung Galaxy S3 Mini GT-i8190 Clone.

Requirement for Flashing Official Firmware/ ROM

driver must works on PC USB drivers.
Enable developer mood and USB Debugging
Smart phone flash toollink

Step 1,

Download and install Samsung Galaxy S3 Mini GT-i8190 Clone. USB drivers after that, enable “Developer and Debugging mode

Step 2,

Turn off your Samsung Clone Device by pressing Power button and if you can, remove the battery.

Stock

Step 3,

Download Stock Rom For Samsung Galaxy S3 Mini GT-i8190 Clone.

Download Samsung Galaxy S3 Mini GT-i8190 Clone. Stock Rom(please Find right Stock Rom)

after that extract downloadedSP Flash tool. (to extract you will need this software). after extract open Flash tool by Clicking “Flash tool.exe”

Step 4,

After open Flash tool. There is tab called Download. Click the “Download tab”

Step 5,

Samsung S3 Mini Phone

after that, There is a button Called “Scatter-Loading”. Click it and locate the catter file. there is the catter file in the Stock Rom folder. some thing like – “#### android catter.txt”

Step 6,

Start Flashing Stock Rom on Samsung Galaxy S3 Mini GT-i8190 Clone.

Final Step. Click the Download button to Begin Flash.

Now connect your Samsung Clone Device to your PC or lap via data cable. after then, press Volume Up and Volume Down until the Samsung Clone Device is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.

♥ NoteWhat is the Stock & Custom Rom? Firmware? Bootloader?

Step 7,

Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Stock Rom.

Errors and Solutions

Samsung Clone phone not works after flashing

A : Give it to 5min. because first boot is slow. If not works, then flash it again please go step by step.

Samsung Galaxy S3 Mini GT-i8190 Clone. stuck at Boot logo or Bootloop

Specifications

A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data (Hard reset). If not works then Try again to install Stock Rom.

automatically disconnecting during flashing Samsung Clone phone

Samsung Galaxy S3 Mini Gt I8190 Stock Rom Price

  • please Try another data cable.
  • Try to install Drivers again
  • Try another Computer.

I can’t Flash Stock Rom Samsung Clone phone

please try again. after did, if does not works then leave a comment with error message.you Had better give us Screenshot.

My phone keep restarting

  • It may be your Samsung Galaxy S3 Mini GT-i8190 Clone. case is pressing on it
  • May be, your current Rom is Corrupted or damaged. So you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.

PMT changed Error

  • Try to format your phone using Sp flash tool,
  • Find another Rom
  • If not works, then open the scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”

Other error messages and Solutions ..

  • Below we listed errors of SP Flash tool and there is a link to fix these errors. Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize scatter failed,Error 0X411,
  • B8038! Android download pmt is ready and layout has been changedLED
  • BROM ERROR : S_FT_DOWNLOAD_FAIL (4008) - this is a encountered an error.
  • BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149) Sp can't Flash files. go to dedicated post below
  • BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
  • ROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) go to dedicated post below
  • BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
  • BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007) go to dedicated post below
  • BROM ERROR: S_STORAGE_NOT_MATCH (3182) visit dedicated post below
  • BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00
Samsung Galaxy S3 Mini Gt I8190 Stock Rom

If you face this kind of error message then this is the face for fix it. Go to this dedicated post

So, If this Samsung Clone phone Flashing guide line was help, then please share this guide line to facebook and twitter. Help others to find out this guide line on facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.